Whether it is to enhance the look or performance of their Porsches, customers trust that Champion Motorsport will delivery on all counts...

 

Monolite Forged Alloy Wheels The Champion Motorsport Monolite begins its life as a solid disc of high-grade aluminium alloy. 8,000 tons of pressure is used to increase material density and tensile strength as it shapes the wheel. Forging makes the metal stronger, therefore the wheel can be made thinner and lighter. The Monolite line of ultra light wheels are 100% machined utilizing state-of-the-art computerized precision equipment, which assures even distribution of material across all surfaces. This process may be more involved, but it guarantees exceptional tolerances and outstanding quality. The Champion Motorsport Monolite is a wheel with unmatched quality and trueness, perfectly tailored to your Porsche.

RG5 Size 18" / 19" / 20" Application 993 / 996 / 997 / Boxster / Cayman	RG5B Size 18" / 22" Application 996 / 997 / Boxster / Cayman / Cayenne
RS97 Size 18" / 19" / 20" Application 996 / 997 / Boxster / Cayman / Cayenne	RS98 Size 19" Application 996 / 997 / Boxster / Cayman
RS128 Size 20" Application 997 / Boxster / Cayman	RF67 Size 19" / 20" Application 996 / 997 / Boxster / Cayman
RS171 Size 19" Application 996 / 997	RG24 Size 22" Application Cayenne

RS137 Size 22" Application Cayenne

Tubi Style Srl, located in Ubersetto di Fiorano - the heart of the Italian "Terra dei Motori", produces exquisite exhaust systems that transmute raw engine noise of supercars into music. In 2004, Tubi Style partnered with Champion Motorsport to develop a line of high end exhaust systems for Porsches. A complete range of sports and race mufflers, manifolds, and tailpipes are available for the Porsche 996, 997, Boxster, Cayman, and Cayenne models.

Werks One Composites, a subsidiary of Champion Motorsport, has been established to set a new standard in carbon fibre products for Porsches. The primary goal is to deliver a functional part that equals, if not surpasses, the fitment of the factory piece it replaces. The quest for excellence in the product design and fabrication constitutes the very soul of Werks One Composites.
	The Werks One Composites front splitter for the 997 Turbo improves the frontal airflow. The larger brake ducts incorporate a deep channel that helps guide the increased amount of air smoothly to the front brake system. The race inspired splitter design helps improve front downforce while enhancing aesthetics to the front fascia. The splitter is constructed entirely of the highest quality carbon fibre composites, with machined aluminium skid plates integrated to the lower side to further improve rigidity and durability.
	The Werks One Composites lower rear diffuser for the 997 Turbo streamlines the turbulent airflow along the rear underside of the vehicle. By covering up the normally exposed engine, the underbody airflow is accelerated. This creates low air pressure which sucks the car to the ground. With the aid of the additional air vanes, the flow of air is guided straight out the back of the vehicle, creating greater downforce. The diffuser is constructed entirely of the highest carbon fibre composites, with a layer of high temperature insulation along the underside.
	The Werks One Composites rear wing for the 997 Turbo improves downforce at the rear of the vehicle. With the aid of wind tunnel testing, this race-inspired wing will not only delivery amazing cosmetic enhancements, but significantly improved handling characteristics. The inverted wing design helps to generate negative lift, literally forcing the rear of the car down to the road, thus improving tire ability to grip the road. The full carbon fibre wing attaches to the vehicle in the same fashion as the factory rear spoiler. No modifications are required for installation.
	The Werks One Composites airbox for the 997 Turbo provides a proper and effective way of delivering a larger volume of air to the engine. This is achieved by simplifying the airflow path and removing abrupt changes in flow direction. Air consumption is further enhanced by the twin decklid inlets, which more effectively utilizes the high pressure air generated at speed. Included is a silicone host that smooths out the airflow directed into the throttle body. The completely sealed intake system assures that only cold air enters the engine, while the free flow ITG filter elements keep debris out. In addition to increasing performance, the airbox delivers an enhanced aesthetic appeal to the engine bay with its flawless carbon fibre construction and CNC billet aluminium hardware. Also available for the 997 Carrera models.

Enhance the feel of your Porsche with the aid of Champion Motorsport Sport Springs. Developed in conjunction with H&R, the sport springs offer superb performance, improving handling and giving a more aggressive appearance. Champion Motorsport Sport Springs offer more control than the factory springs and remains comfortable for daily driving. This suspension package will not affect any aspects of the Porsche PASM. To further enhance your driving experience, front and rear sway bars are also available. And for the ultimate upgrade, H&R coilover suspension systems are also available.

Please Contact Us for More Product Information.